Line Structure Fabrication
Hot-dip galvanised steel for 11kV to 33kV pole structures, made to our shop drawings: V and cut-point cross arms, top, bottom, DP and guarding channels, D, C, F, danger board and barbed wire clamps, stud and bracing angles, and hole strips. Every part is shown with its dimensioned drawing.
15 products5 categories
Cross Arm3 products
V
| Section | HDG channel 100 × 50 × 6 |
| Overall | 1620 × 460 × 50 mm |
| Holes | 2 × Ø26, 4 × Ø18/30 slot |
| Strip | GI 50 × 6 × 990 |
| Finish | Hot-dip galvanised |
Cut Point
| Section | 2 × HDG channel 100 × 50 × 6 |
| Overall | 1830 × 260 × 120 mm |
| Holes | 16 web + 16 flange slots Ø18/30, 4 × ØX |
| Finish | Hot-dip galvanised |
Straight Cut Point
| Section | 2 × HDG channel 100 × 50 × 6 |
| Overall | 2500 × 260 × 120 mm |
| Holes | 16 web + 16 flange slots Ø18/30, 4 × ØX |
| Finish | Hot-dip galvanised |
Channel4 products
Top
| Section | 2 × HDG channel 75 × 40 × 6 |
| Overall | 1250 × 260 × 95 mm |
| Holes | 6 web + 4 flange slots Ø18/30, 4 × Ø18 U bolt |
| Finish | Hot-dip galvanised |
Bottom
| Section | 2 × HDG channel (100 × 50 × 6 as dimensioned) |
| Overall | 2500 × 260 × 120 mm |
| Holes | 8 web Ø18, 8 flange slots Ø18/30, 8 U bolt Ø18 |
| Finish | Hot-dip galvanised |
DP
| Section | 2 × HDG channel 100 × 50 × 6 |
| Overall | 3250 × 260 × 120 mm |
| Poles | 2 at 1500 centres |
| Holes | 8 web + 12 flange slots Ø18/30, 4 × ØX, 4 × Ø18 |
| Finish | Hot-dip galvanised |
Guarding
| Available in | 2050, 2750 |
| Section | 75 × 40 × 6 HDG channel |
| Overall | 2050 mm |
| Holes | 6 × Ø18 in the web |
| Finish | Hot-dip galvanised |
Clamp5 products
D Type
| Section | 50 × 10 GI flat |
| Overall | 300 × 110 mm |
| Holes | 2 × Ø18 |
| Finish | Hot-dip galvanised |
C Type
| Section | 50 × 10 GI flat |
| Overall | 330 × 60 mm |
| Holes | 2 × Ø18 |
| Finish | Hot-dip galvanised |
F
| Section | 75 × 40 × 6 channel, 100 × 50 × 6 cleat |
| Overall | 450 × 75 × 90 mm |
| Holes | 2 × Ø18/30 slot, Ø26 through the cleat |
| Finish | Hot-dip galvanised |
Danger Board
| Section | 25 × 5 GI flat |
| Overall | 240 × 130 mm |
| Holes | 2 × Ø12 |
| Finish | Hot-dip galvanised |
Barbed Wire
| Section | 25 × 5 GI flat |
| Overall | 280 × 60 mm |
| Holes | 2 × Ø12 |
| Finish | Hot-dip galvanised |
Angle2 products
Stud
| Available in | 1000 (H cross arm), 1200 |
| Section | 50 × 50 × 6 GI angle |
| Overall | 1000 mm |
| Holes | 2 × Ø18, 900 apart |
| Finish | Hot-dip galvanised |
Cross Bracing
| Available in | Horizontal brace, Cross brace |
| Section | 50 × 50 × 6 GI angle |
| Overall | 1850 mm |
| Holes | 6 × Ø18, two groups of 3 |
| Finish | Hot-dip galvanised |
Can't find a spec?
Tell us what you need
We'll match voltage class, mechanical rating and creepage exactly — and reply within one business day.